Pop Up 2 gang Socket, Matt ChromeFlush Fitting - Black Button
(1 Customer Review)
Pop Up Socket Buying Guide & Comparison Chart
Did you know...
The Matt Chrome Top Disc compliments the Silver surround and this particular model has a Black Electrics Panel and you just depress the Black button to 'pop-up' the unit about 25-30mm - and then draw it into position. Adds that real wow factor to any kitchen, especially when used in conjunction with the flush fit adaptor ring, now supplied as standard!
This unit is predominantly manufactured from a quality Zamak (Metal) material and will enhance any kitchen, workspace or prestigious development, where power or data distribution is required. As with all our concealed sockets, we always recommend you get a tradesperson to install this unit.
Useful Technical Data / All Pop Up Sockets now rated to to IP54
Approx. Column Height when fully extended, from top or worktop - 190mm
Overall Outside Diameter of Top Plate with Depress Button - 120mm
Suggested Hole Size - See below but use a test template if in doubt
with flush fit adaptor (supplied) : 124mm
without flush fit adaptor : 100mm -0/+1mm
Thickness of Chrome Top Disc, when used without a 'Flush Fit' Adaptor - 7mm
Overall Diameter of Shoulder Washer that clamps under the worktop - 152mm
(this can be reduced down to as much as 110mm, if trimmed)
Approx. Depth required when retracted fully - 260mm
(the depth required is measured from the TOP of the worktop & includes space for the wires/cables to exit the bottom of the unit, so worktop thickness can be taken off this figure.)
Reviews are shown below. Why not submit your own review?
Not fitted yet but quick service so performance rating not accurate
|Value for money|
|Overall Score||4.3 / 5|
Frequently asked questions about this item are shown below. Do you have a question?
Q: Would it be possible to have this product with italian Power Sockets ? Thanks.
A: Hi there, I'm afraid that although we can get different sockets made, other than the UK 3 Pin system, there is a minimum order quantity attached to these 'special orders', of 5 units and the lead time would be 3 to 4 weeks. If this is viable for you then please let me know and I'll get something worked out formally for you? Regards BPF WebSales Team
Q: Can the top be finished in a marble for instance so that it is concealed within the worktop?
A: I've checked on this and the best they can offer is to affix a 3M Product to the top of this disc, along these lines : http://solutions.3mitalia.it/wps/portal/3M/it_IT/Industrial-Adhesives-Tapes/-/ BPF WebSales
Q: Can these be ordered with standard US outlet?
A: I'm sorry but we only offer these currently as standard for the UK 3-Pin 240v System. We have had other socket configurations made in the past as 'specials' for customers, but the minimum quantity, to warrant a special set up would be 5 units.