Plastic Spring Button Clip, 6mm Buttons

A flexible spring clip designed for the mobility aid industry primarily, but with a multitude of other uses. Springs to lock into place with 2 No. 6mm Buttons and with a arm length of approximately 40mm.

We show standard colours and finishes where possible but these are constantly changing so if you require a colour not listed in the drop-down, speak to us as we may well have added it since.  

   Why not submit your own review?

Submitted by Mr Will Nash (26/04/2023)
Im using these with a 19mm internal diameter tube I havent fully assembled my project yet but they seem fine

Quality
Accurate Description
Performance/Suitability
Value for money
Overall Score	5.0 / 5

Submitted by Tom W (4/02/2022)
Unfortunately these 1 button clips have two buttons. I cut one off on a couple but still had issues the bend is not tight enough to fit in a tube of less than 25mm and even if it did the button is too short to engage with the outer tube. Unfortunate. Servicedelivery excellent though.

Quality
Accurate Description
Performance/Suitability
Value for money
Overall Score	3.0 / 5

Submitted by Roxana Stancescu (10/07/2018)
I bought these clips for an off grid application, without knowing if they will fit or not. They fit, even if not perfect (2 extra millimeters in button height would have been perfect), so they are usable. Other than that, the quality of the product is excellent. BPF communication, conduct, quality of service and delivery time were just great. I will recommend BPF and I will order again from BPF. Thank you!

Quality
Accurate Description
Performance/Suitability
Value for money
Overall Score	4.8 / 5

Submitted by Mr Peter Wells (18/07/2015)
perect

Quality
Accurate Description
Performance/Suitability
Value for money
Overall Score	5.0 / 5

Submitted by Mr Peter Wells (18/07/2015)
perfect

Quality
Accurate Description
Performance/Suitability
Value for money
Overall Score	5.0 / 5

Frequently asked questions about this item are shown below. Do you have a question? Submit FAQ

Q: Just a quick question, what plastic are these Spring clips made from?

A: These ones you've asked about here are made from Nylon 6 Plastic and we also have metal ones which are normally listed as a cross-selling option, down at the bottom of the product page.

Q: Dear Bpf, I need to know some measure of the clip, such as: -push button round -lenght before pleating Best regards, Enrico

A: Hello, Thanks for your enquiry and I can confirm that we have just added a technical drawing to this part on the website, which you should find under the Technical Data tab. I've also now made that particular part avaialable as a free of charge sample to order online, so you can try before you buy. Hope that helps! BPF WebSales

• Technical Drawing

 Tube Fittings Buying Guide