Ø65x40mm High M12 Single Male Anti Vibration Mounts

These 65mm diameter anti-vibration mounts or dampers are 40mm high and come with a standard M12 x 37mm single male thread. We also have countless other options across multiple thread forms, including male, female, single thread, twin thread and combination AVM's (which feature a male and a female thread on the same component).

Anti-vibration mounts have a multitude of uses but are typically used as feet for machinery, conveyors, air conditioning units, washing machines, generators, pumps, car engines and just about anything where you want to remove vibrations, shocks or reduce sound. They will isolate machines and equipment from supporting structures, reducing noise, dampening mechanical vibrations and preventing structural damage. They are typically placed between the base of a vibrating device and the floor, wall, or frame. 

Anti-vibration mounts are also known as:

• AV mount
• Vibration isolator
• Rubber mount
• Shock mount
• Vibration dampening mount
• Isolation mount

Generally, our range of AVMs is available in a premium NBR (Nitrile Butadiene Rubber) Shore A 55 Degree with steel thread, but many customers take advantage of the significant savings (up to 60%) by using the more standard quality NR Rubber/St.37 metal washers/6.8 quality bolts.

Key Features:

• Resilient foot or damper with a 65mm Round Base
• Manufactured from a forgiving Rubber
• Standard M12 Thread with 1.75mm Pitch
• Raises structures off the floor
• Shock-absorbing and sound-dampening
• Anti-slip properties
• Designed primarily for indoor use but can be used outside (but not UV-stabilised as standard)

Technical Information:

• Base Diameter: 65mm Round
• Thread Form: Single M12 x Industry Standard 1.75mm Pitch
• Exposed / Available Thread: 37mm
• Base Height: 40mm
• Compatible with Threaded Inserts, including D Nuts and T Nuts
• Material: NBR or NR

Suitable for:

• Levelling off furniture 
• Height raising
• Dampers or mounts
• Replacing castors
• HVAC Systems
• Industrial machines
• Heavy-duty equipment
• Automotive & marine
• Sensitive electronics
• Domestic appliances
• Noise & vibration control

If this doesn't quite fit what you need, you can explore our full range of feet and castors. You'll find a variety of other options including stainless threaded feet, chrome capped feet, tilt feet, furniture glides, all-metal feet and even self-assembly feet in the form of sockets and pre-cut all thread studs, meaning you've no limitations to the length you can go.

If you decide you don't want a visible thread and you're using hollow tube or box section, then we also have a range of table leg adjusters and tiltserts or contact us if you can't find what you need.

  There are currently no reviews for this product. Why not submit a review?

There are currently no FAQs for this product. Do you have a question? Submit FAQ

• Material Data Sheet
• NR vs NBR